Muffle Furnaces
Across International MUFFLE FURNACE 16X12X12
- Max working temperature: 1200 °C
- Max constant working temperature: 1100 °C
- Chamber dimensions (W x D x H): 16 x 12 x 12 in
- Chamber volume: 1.33 cu ft
- Heating element: Kanthal A1 2.0 resistance coil wire
- Refractory lining: Mitsubishi 1500-grade alumina fiber
- Electrical requirements: 208-240 VAC, 50/60 Hz, single-phase
- Controller: Eurotherm 3204 or Shimaden FP93
- Controller segments: 8 or 40 segments
- Maximum heating rate: < 15 °C/min
- Thermocouple type: K
- Control type: Microprocessor-based self-tuning PID
- Computer interface: Built-in for PC connection
- Safety features: Overheat and power failure protection
- Certification: ETL tested, UL, CSA, and CE certified
- Internal housing: Double-walled steel
- Warranty: 1 year
- Installed heating power: 4 kW
Yamato Scientific America, Inc. Yamato 3.75L Standard Muffle Furnace with Communication Port, 220V
Standard 3.75L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C.
NABERTHERM INC The muffle furnaces are for daily laboratory use. They stand out for their excellent workmanship and high level of reliability. Can come equipped with a flap door or lift door at no extra charge.
The muffle furnaces are for daily lab use, outstanding workmanship, high level of reliability, non-classified fiber insulation, housing made of structured stainless steel, heating from two sides (three sides L24/11-LT60/12), either flap (L) or lift door (LT)
Yamato Scientific America, Inc. Yamato 7.5L Standard Muffle Furnace with Communication Port, 115V
Standard 7.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness w/a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features: self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options: exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded w/long life R-thermocouple sensors. Designed w/ communication port. Temperature range: 100~1150°C. *Item does not come with a cord/plug. Must be purchased separate.
NABERTHERM INC Ashing furnaces designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis.
Ashing furnace LV ../11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.
Yamato Scientific America, Inc. Yamato 7.5L Standard Muffle Furnace with Communication Port, 220V
Standard 7.5L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C.
Mti Corporation 1100C LARGE MUFFLE FURNACE
- Heating Chamber Dimensions: 16 in x 16 in x 16 in (40 x 40 x 40 cm)
- Chamber Capacity: 64 liters (2.37 cu ft)
- Continuous Operating Temperature: 100-1100 °C
- Maximum Temperature (Short Term): 1200 °C (under 1 hour)
- Temperature Stability at 1000 °C: +/- 1 °C
- Temperature Uniformity at 1000 °C: +/- 5 °C
- Max Heating Rate: 20 °C/min
- Power Voltage: AC 208-240 V, Single phase, 50/60 Hz
- Power Wattage: 7.5 kW
- Current Rating: 34 A
- Insulation Material: High-purity alumina fiber
- Structure: Heavy-duty double-layer with cooling fan
- Vent Port: Built-in 1/4 in barbed gas inlet/outlet (rear)
- Safety Features: Door interlock
- Temperature Controller: FA-YD518P-AG (primary, 1 source) / Digital (primary, 2 sources)
Yamato Scientific America, Inc. Yamato 11.3L Standard Muffle Furnace with Communication Port, 220V
Standard 11.3L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C.
Mti Corporation 1100C COMPACT MUFFLE FURNACE
- Maximum temperature: 1100 °C (< 1 hour)
- Continuous temperature: 1000 °C
- Chamber dimensions: 100 mm x 105 mm x 130 mm
- Chamber capacity: 1 liter (65 in³)
- Overall dimensions (door closed): 230 mm x 200 mm x 360 mm
- Overall dimensions (door open): 230 mm x 440 mm x 360 mm
- Insulation type: High-purity fibrous alumina
- Energy consumption reduction: 30%
- Door type: Drop-down
- Safety features: Automatic power-off on door open, over-heating protection, broken thermocouple protection
- Controller type: PID automatic control with auto-tune function
- Programmable segments: 30
- Rated voltage: 110V AC
- Power: 950 W (15A fuse)
- Power plug: NEMA 5-15P
- Heating rate: Up to 30 °C/min
- Controller panel size: 48 mm x 48 mm (digital)
- Optional features: Gas inlet/outlet ports for purging (extra cost)
NABERTHERM INC Ashing furnaces designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis.
Ashing furnace LV ../11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.